Model 200i
The Model 200i continues the Dynojet tradition of providing a reliable, repeatable, consistent and easy to use chassis dyno for quick and accurate diagnosing of performance problems. The Model 200i offers an improved operator interface through the use of the integrated control console, new WinPep 7 software and a wider platform for easy loading & unloading. Shop sales, service work and credibility all benefit with a Dynojet chassis dynamometer.
Model 200i : Details
- Inertia Dynamometer Chassis with standard wheel base up to 84 inches
- Measures up to 750 horsepower, 200 MPH
- Dynoware EX+ hardware includes:
- CPU Module: Com Port Interface, runs on 12VDC & 110VAC
- Dyno Module: Sends and receives data to and from the Dyno
- Atmospheric Sensing Module: Automatically measures absolute pressure, air temperature and relative humidity
- RPM Module: Receives and processes ignition (spark) signals for correct engine speed measurement
- Control Panel with Arm
- Primary Wire Inductive tachometer pickup
- Secondary Inductive Pickups (spark plug clamps connect directly to spark plug wires)
- WinPEP 7 Software, Windows 95 to Windows XP
- Bike Starter System (requires battery)
- Wheel Lock
- Installation and Operation manuals provided on CD-ROM
- Training voucher for MMI Dyno operations course (Orlando or Phoenix)
- Technical support helpline
- 1 Year replacement part warranty
Model 200i : Specifications
- Dedicated 240v 30amp single-phase circuit
- Maximum Horsepower: 750 hp
- Maximum Speed: 200 mph
- Timing Accuracy +/- 1 microsecond
- Drum Speed Accuracy +/-/100th mph
- RPM Accuracy +/-1/10th rpm
DIMENSIONS (Above Ground Model) |
Base Length |
79.83" (202.8 cm) |
Base Width |
42.50" (108.0 cm) |
Base Height |
18.10" (45.9 cm) |
Drum Diameter |
18" (45.72 cm) per wheel |
Drum Width |
20" (50.80 cm) |
Drum Concentricity |
+/- 0.001" (+/-0.025 mm) |
Maximum Bike Length |
84" (213.4 cm) |
WEIGHT |
Dynamometer |
1600 lbs (725 Kg) (approx.) |
Crated Dynamometer |
1700 lbs (771 Kg) (approx.) |
Drum Weight |
875 lbs (397 Kg) |
MATERIAL |
Drum |
A 106 Steel |
Shaft |
2 3/16 inch 1144 turned, ground & polished steel |
Frame |
10 Gauge Cold Roll Steel |
PERFORMANCE SPECIFICATIONS |
Modelled Mass (Standard) |
450 lbs (204 Kg) (approx.) |
Modelled Mass (High-Inertia) |
650 lbs (295 Kg) (approx.) |
Maximum Horsepower |
500 hp |
Maximum Speed |
200 mph |
Maximum Torque |
500 ft/lbs |
Temperature Range |
32°F to 158°F (0°C to 70°C) |
GENERAL |
Calibration |
Not required (factory calibrated) |
Inductive Pickup |
Primary Wire RPM Pickup |
Power Requirements |
240v 30amp single phase circuit |
Remote Switches |
Remote Software Control |
HARDWARE |
Timing Accuracy |
+/- 1 microseconds |
Drum Speed |
+/- 1/100th MPH |
RPM Accuracy |
+/- 1/10th RPM |
|
