Model 250ix
The same technology that has made the Dynojet Motorcycle Chassis Dynamometer the industry standard has led to the development of this dynamometer engineered for most other powersports platforms (ATV's, Side-by-Sides, Go-Karts, and Trikes).
The Dynojet Powersports Dynamometer allows for complete drive-train testing by measuring performance at the drive wheels.
Existing Model 200i or 250i owners can upgrade their equipment to increase capabilities.
Model 250ix : Details
- Closed-loop control of Speed or RPM
- Easy-to-use software, push button operation
- Test Vehicles at full or partial throttle
- Absorption unit capable of 858 lb/ft torque
- Compact design
- Ignition Wire Inductive Tachometer Pickup Leads
- Optional closed -loop Torque control module
- Remote Software and Brake Control From Driver's Seat
- Inertia Dynamometer Chassis with standard wheel base up to 84 inches
- Measures up to 750 horsepower
- Primary Wire Inductive tachometer pickup
- Secondary Inductive Pickups (spark plug clamps connect directly to spark plug wires)
- WinPEP7 Software
- Bike Starter System (requires battery)
- Wheel Lock
- Installation and Operation manuals provided on CD-ROM
- Full Telephone Technical support
- 1 Year replacement part warranty
- Dynoware EX+ hardware includes:CPU Module,Dyno Module, Atmospheric Sensing Module and RPM Module
DIMENSIONS (Above Ground Model) |
Base Length |
29.83" (202.8 cm) |
Base Width |
70.71" (179.6 cm) |
Base Height |
18.10" (45.9 cm) |
Drum Diameter |
18" (45.72 cm) per wheel |
Drum Width |
16.38" (42 cm) |
Drum Concentricity |
+/- 0.001" (+/-0.025 mm) |
Maximum Bike Length
(Front of Front Wheel to Center of Rear Wheel) |
84" (213.4 cm) |
WEIGHT |
Dynamometer |
3550 lbs (1609 Kg) (approx.) |
Crated Dynamometer |
3650 lbs (1655 Kg) (approx.) |
MATERIAL |
Drum |
A 106 Steel |
Shaft |
2 3/16 inch 1144 turned, ground & polished steel |
Frame |
10 Gauge Cold Roll Steel |
PERFORMANCE SPECIFICATIONS |
Modelled Mass (Standard) |
450 lbs (204 Kg) (approx.) |
Modelled Mass (High-Inertia) |
650 lbs (295 Kg) (approx.) |
Maximum Horsepower |
750 hp |
Maximum Speed |
200 mph |
Maximum Torque |
750 ft/lbs |
Temperature Range |
32°F to 158°F (0°C to 70°C) |
GENERAL |
Calibration |
Not required (factory calibrated) |
Inductive Pickup |
Primary Wire RPM Pickup |
Power Requirements |
240v 30amp single phase circuit |
Remote Switches |
Remote Software Control |
HARDWARE |
Timing Accuracy |
+/- 1 microseconds |
Drum Speed |
+/- 1/100th MPH |
RPM Accuracy |
+/- 1/10th RPM |
Model 250ix : Accessories
Depending on your current configuration, there are several options that can be added to your Dynojet Dynamometer to meet your individual needs. All of these options can be added from the factory at time of original dyno purchase, or purchased separately at any time thereafter. Contact Dynojet's Product Specialists at 01995 600500 for pricing and availability.
- Find out more about our WINPEP Website
- Check on an upgrade/accessories table below for more info.
Dynamometer Modularity Information Table
Accessory / Upgrade |
Model 250ix |
Model 250ix Pit |
Data-Link for Harley-Davidson Delphi ECM Application |
Y |
Y |
Air/Fuel Ratio Module (Requires availability of shop air) |
Y |
Y |
Dual Multi-Axis Cooling Fan System |
Y |
Y |
Monitor Tray |
Y |
Y |
Motorcycle Carriage |
S |
S |
Air Brake / EEC Safety |
Y |
Y |
Extended Carriage |
Y |
Y |
Power Clamp / Carriage |
S |
S |
Fat Boy Wheel Adapter |
Y |
Y |
Folding Ramp |
Y |
Y |
Analog Module |
Y |
Y |
Eddy Current Load Absorption Unit |
S |
S |
Torque Cell Package |
Y |
Y |
Data-Link for Harley-Davidson Delphi ECM Application |
Y |
Y |
Thermocouple Amp |
Y |
Y |
Y = Available X = Not Available S = Standard |
|
