» Model 224x
» Model 224x LC
» Model 248x
» Model 424x
» Model 424x LC²

» Model 200i
» Model 250i

» Model 168
» Model 178

Motorcycle Dyno Options

Depending on your current configuration, there are several options that can be added to your Dynojet Dynamometer to meet your individual needs. All of these options can be added from the factory at time of original dyno purchase, or purchased separately at any time thereafter.

Click on an accessory/upgrade below for more info:

⊕ = Option.
S = Standard
N/A = Not Available

	Air/Fuel Ratio Module With the addition of our new air/fuel ratio module, every dyno run can show you not only horsepower & torque, but also exact air/fuel ratio. Retrofit table to any existing Model 200 dynamometer, as well as any upgraded Model 100 or 150 dyno utilizing the new hardware upgrade and WinPEP software.
	Dual Multi-Axis Cooling Fan System This integrated cooling fan system option has adjustable arms and can move 1,800 CFM from each fan. These fans are controlled from the control pod.
	Monitor Tray The monitor tray assembly supports a standard computer monitor, keyboard, and mouse for easy access while operating the dyno. The tray swivels to provide front or side usage, and the assembly bolts directly to the dyno chassis for easy, stable installation. The tray is made of high-quality steel for strength and durability.
	Air Brake/EEC Safety The Brake option can be added to the Dyno to quickly slow the drum after the run. This is recommended when testing two-stroke motorcycles which do not have as much engine braking.
	Eddy Current Load Absorption Unit Capable of 858 lb/ft absorption. Comes standard with Model 250i
	Power Clamp/Carriage The power carriage option replaces the standard hand crank on the carriage with a 110v electric drive motor. With the press of a button, the carriage moves forward or back. This option is ideal for Dynos that are recessed where the hand crank is difficult to access. The power carriage also reduces the time spent making adjustments for various length vehicles.
	Torque Cell Package The Torque Module is for measuring loaded roll-ons and real-time torque with the new WinPEP7 software. Perform sweep and step tests, as well as wind drag simulations.
	Extended Carriage The extended carriage option increases the maximum wheel base (measured from the front of the front wheel to the centre of the rear wheel) from 84 inches to 102 inches for testing raked cruisers and drag bikes.
	Fat Boy Wheel Adapter The Fat Boy adapter is necessary when strapping a Harley-Davidson Fat Boy, or any other bike with a solid front wheel, to the carriage of the dyno. Adapter includes a second ratchet, ratchet strap, double hook strap, and necessary fastening hardware.
	Folding Ramp The folding ramp option includes gas assist struts for one person operation.