|
WINPEP7 DYNAMOMETER SOFTWARE |
Current Version |
7.5.1 |
Compatible Operating Systems |
Microsoft Windows® 98/ME/NT 4.0 or later/2000/XP |
Available languages |
English, French, German, Italian, Dutch, Spanish, Chinese & Japanese. |
Text help file |
 (666 KB pdf file)
|
Complete manual |
 (1.31 MB zip file)
|
Animated Tutorials |
|
Dynojet's new WinPEP (Windows® Performance Evaluation Program) uses a Windows® File Manager style selection window, as well as an outline selection window to access previous runs and store new ones. Runs are stored by Make, Model, and Name (the same structure as our previous DOS version of "PEP").
The easy-to-use WinPEP software is available in English, French, German, Italian, Dutch, Spanish, Chinese & Japanese. Foreign language software includes the capability to configure the units of measure for horsepower, torque, vehicle speed, and all automatic atmospheric condition measurements.
If you have a licensed copy of our WinPEP 7 software, download the WinPEP 7 Update to the latest version here!
IMPORTANT: This program is compressed so that you may download it easily to your home computer. To use the software, you must "UN-ZIP" these files. This can be done easily by using WinZip. If you have never used a compression program before, WinZip offers basic information and technical support for frequently asked questions.
Specifications & Requirements
Dynojet recommends obtaining a computer system from a local supplier who will assemble the system from individual components. The benefit in doing this is twofold: 1) The components and software in a scratch-built system are usually of higher quality than the components used in mass-produced systems purchased from a typical computer superstore. 2) When you obtain a computer from a local builder, you also get their services should a problem arise. While problems may be few and far between, having a local source for assistance can be invaluable.
- Pentium 800 MHZ +
- 40 Gigabyte Hard Drive
- 256 MB of RAM
- 800 x 600, 256-Color Monitor (SVGA)
- CD Rom and Floppy Disk Drive
- Microsoft Windows® 2000 / XP
- Printer (preferably HP DeskJet®)
- 30 Megabytes of free hard disk space is required to install WinPEP
Dynojet Fuel Injection Tuning Link
The Dynojet Fuel Injection Tuning Link is an innovative piece of software that allows the automatic fuel curve optimization of a Power Commander equipped motorcycle. The Tuning Link software interfaces the Power Commander with a Model 250 Load Control Dynamometer. The Tuning Link software controls both the Dynamometer and the Power Commander at the same time.
The Dyno operator simply follows the instructions on the Screen.
By utilizing the Dynojet "Real Time" air/fuel ratio monitoring equipment and latest "load control" Dynamometer technology, the Tuning Link monitors the current air/fuel ratio at over one hundred and forty different points. At the same time, the Tuning Link automatically calculates the correct fuel adjustment to achieve the user desired air/fuel ratio. Once calculated, the Tuning Link uploads these new fuel values to the Power Commander and saves a copy of the file.
The Air / Fuel ratio can bet set for Cruising and Power ranges.
The Tuning Link has the ability to map fuel curves in both "static" and "dynamic" modes. This assures that the generated fuel curves are correct for both steady state cruising as well as during aggressive on/off throttle movements.
Software in action during a Dynamic 100% throttle roll-on test.
This technology allows the Dyno Operator to accurately "optimize" the bike in a very short time, regardless of the bikes modifications.
The Dynojet Fuel Injection Tuning Link is compatible with any Power Commander III or Power Commander III r equipped motorcycle.
For further details, please contact technical@dynojet.co.uk.
|
